Product Information & Care.
​

Diffuser - Fragrance Oil Car Freshener - Care & Instructions

Instructions for use:

• Remove the plastic stopper: Gently remove the wooden cap & plastic stopper and replace the wooden cap.
• Invert / Tip: Briefly to allow the oil to come in contact with the wooden cap, it doesn't need much, just a quick invert and then back upright again. 
• Select a suitable location: It's up to you where you locate your diffuser, a common place is the rear view mirror.
  Pros: It allows the diffuser to hang freely and sway gently, which helps to disperse the ​scent. It's usually out of the way of vents and direct sun (if parked in the shade).
  Considerations: Ensure it doesn't obstruct your view of the road or the mirror itself. It needs to hang at a length that doesn't swing wildly or hit the windshield.

Factors that influence longevity:

• Frequency of Inverting/Tipping: The more often you invert the bottle to re-saturate the wooden cap, the faster the oil will be absorbed and evaporate. It's often recommended to do this only when you notice the scent fading.
• Temperature: Hotter climates (like Australia, especially in summer) or parking in direct sunlight will cause the oil to evaporate much faster. Cooler temperatures will extend its life.
• Airflow/Ventilation: If you frequently drive with windows down or have strong air conditioning/heating blowing directly on the diffuser, the scent will dissipate more quickly.
• "Nose Blindness": Sometimes, you might become accustomed to the scent and stop noticing it, even if the diffuser is still actively working. Other passengers might still detect it.
  
  
• Tips for maximizing longevity:
• Only invert when needed: Resist the urge to constantly tip the bottle.
• Park in the shade: When possible, keep your car out of direct sunlight.
• Place strategically: Avoid direct blasts of air from vents.
• Replace the stopper: When not in use for extended periods you can put the plastic stopper back in to prevent evaporation, though this isn't usually practical for daily use.

Salt Lamps - Care & Instructions

All salt lamp cords and globes sold in Australia must now be 24V or under to comply with current regulations.

A quick word on globes:

These specially designed globes are made to fit the narrow holes in salt and selenite lamps. They’re small, sensitive, and not your average light bulb.

To get the most life out of your globe:

• Screw it in firmly
• Don’t move the lamp while it’s on
• Leave it on continuously if possible
• Avoid power surges, even small ones

Turning the lamp on and off frequently can blow the globe quickly. With gentle care, they can last for months on end.

Scented Candles - Care & Instructions

Before Each Burn:

• Trim Your Wick (Crucial!): This is arguably the most important step. Before every burn, trim your wick to about 1/4 inch (6mm).
• • Why it's important: A trimmed wick ensures a cleaner, safer, and more even burn. A wick that's too long can cause a large flame, excessive smoke (soot), an uneven wax pool, and a faster burn, leading to "mushrooming" at the tip.
  • Tools: Use a dedicated wick trimmer, or small scissors or nail clippers if a trimmer isn't available. Remove any wick trimmings from the wax pool before lighting.

During the Burn:

• First Burn is Key (Memory Burn): On the very first burn, let the candle burn long enough for the entire top layer of wax to melt and pool evenly to the edges of the container. This usually takes 1 hour per inch of the candle's diameter.
• • Why it's important: Wax has a "memory." If you extinguish the candle too soon on the first burn, it will create a "memory ring" and will continue to "tunnel" (burn down the center, leaving wax on the sides) in subsequent burns, wasting wax and fragrance.
• Optimal Burn Time: Avoid burning candles for more than 3-4 hours at a time.
• • Why it's important: Burning for too long can cause the wick to mushroom, the flame to become too large, excessive sooting, and can overheat the container, potentially causing it to crack. Allow the candle to cool and the wax to solidify (at least 2 hours) before relighting.
• Avoid Drafts: Place your candle in a stable, heat-resistant location away from drafts, vents, open windows, or high-traffic areas.
  
  
• • Why it's important: Drafts can cause the flame to flicker, leading to uneven burning, sooting (black marks on the glass), and a faster burn.
• Keep Wax Pool Clean: Ensure the wax pool is free of wick trimmings, matches, or any other debris.
  
  
• • Why it's important: Debris can act as additional fuel, leading to a larger, uncontrolled flame, sooting, and an unsafe burn.
• Never Leave Unattended: Always burn candles within sight.
• • Safety First: Never leave a burning candle unattended, especially if you have children or pets in the house. Always extinguish it before leaving the room or going to sleep.
• Heat-Resistant Surface: Always place your candle on a stable, heat-resistant surface, away from anything flammable (curtains, furniture, paper, bedding).
  
  
• • Safety First: This prevents heat damage to surfaces and reduces the risk of fire.

Extinguishing Your Candle:

• Use a Snuffer: The safest way to extinguish a candle is with a candle snuffer.
• • Why it's important: Blowing out a candle can cause hot wax to splatter and create excessive smoke and soot. A snuffer gently deprives the flame of oxygen, extinguishing it cleanly.
• Never Use Water: Do not use water to put out your candle.
• • Why it's important: Water can cause hot wax to splatter and may cause the glass container to crack.
• Ensure Fully Extinguished: Make sure the flame is completely out and the wick ember is no longer glowing before leaving the room or handling the candle. Allow the candle to cool completely before moving it.

Storage:

• Cool, Dark, Dry Place: Store your candles in a cool, dark, and dry place, away from direct sunlight, extreme temperatures, and humidity.
  
  
• • Why it's important: Heat and direct sunlight can cause the wax to melt or soften, affecting the candle's shape, color, and fragrance intensity. Humidity can affect the wick.
• Keep Covered: If your candle has a lid or dust cover, keep it on when not in use.
• • Why it's important: This helps to preserve the fragrance, prevent dust and debris from accumulating on the wax, and protect the candle from discoloration.
• Upright Storage: Store candles upright to prevent uneven wax distribution or wick misalignment.

When to Discontinue Use:

• 1/4 Inch of Wax Remaining: Stop burning a container candle when approximately 1/4 inch (6mm) of wax remains at the bottom.
• • Why it's important: Burning past this point can cause the glass container to overheat and potentially crack or shatter, which is a fire hazard.

By following these simple guidelines, you can maximize the life, scent throw, and safety of your beautiful scented candles. Enjoy!